670 found, showing page 8 of 17
$0.99
STRAP EMT 1-1/2" 2-HOLE******
Thinwall EMT (electrical metallic tubing) conduit fitting. Features steel construction with zinc plated finish. 2-hole connection, malleable insulated, click-on application.
View Details
$5.29
1/2" T ACCESS FITTING
Type T . Adopts PVC conduit to boxes, threaded fittings and metallic systems. UL listed.
View Details
$7.39
3/4" T ACCESS FITTING
Type T . Adopts PVC conduit to boxes, threaded fittings and metallic systems. UL listed.
View Details
$6.69
1" T ACCESS FITTING
Type T . Adopts PVC conduit to boxes, threaded fittings and metallic systems. UL listed.
View Details
$3.99
*100PK 1/2" METAL STAPLE
Easy-to-start and drive cable staple. Constructed of the highest quality carbon steel. Recessed head to direct hammer drive along legs of staple for easier, straighter drive.
View Details
$23.49
2G GY WP BOX (5) 1/2 OUT
2 gang box with lugs, 2 inches deep with 5 outlets, 1/2-inch NPT(National Pipe Thread). Made of corrosion resistant aluminum, finished with a protective color coating. For wet locations, closure plugs and ground screw included. Gray. UL (Underwriter's Laboratories) listed.
View Details
500' 10STR BLK THHN WIRE
90 degrees Celsius, small diameter, general-purpose, 600 volt building wire to be used as power, lighting, and control wiring. Suitable for use in conduit and raceways. Stranded copper with flame-retardant PVC (polyvinyl chloride) insulation and nylon jacket. Resistant to oil, gasoline, chemicals, and abrasion. UL (Underwriter's Laboratories) listed.
View Details
$1.99
*BUSHING RED.1X3/4
Bushing used to reduce the entry size of rigid threaded conduit to permit joining conduits of 2 different sizes. Steel. UL (Underwriter's Laboratories) listed.
View Details
10STR-RED THHN WIRE 500'
90 degrees Celsius, small diameter, general-purpose, 600 volt building wire to be used as power, lighting, and control wiring. Suitable for use in conduit and raceways. Stranded copper with flame-retardant PVC (polyvinyl chloride) insulation and nylon jacket. Resistant to oil, gasoline, chemicals, and abrasion. UL (Underwriter's Laboratories) listed.
View Details
500' 10STR WHT THHN WIRE
90 degrees Celsius, small diameter, general-purpose, 600 volt building wire to be used as power, lighting, and control wiring. Suitable for use in conduit and raceways. Stranded copper with flame-retardant PVC (polyvinyl chloride) insulation and nylon jacket. Resistant to oil, gasoline, chemicals, and abrasion. UL (Underwriter's Laboratories) listed.
View Details
14STR-RED THHN WIRE 500'
90 degrees Celsius, small diameter, general-purpose, 600 volt building wire to be used as power, lighting, and control wiring. Suitable for use in conduit and raceways. Stranded copper with flame-retardant PVC (polyvinyl chloride) insulation and nylon jacket. Resistant to oil, gasoline, chemicals, and abrasion. UL (Underwriter's Laboratories) listed.
View Details
500' 14STR GRN THHN WIRE
90 degrees Celsius, small diameter, general-purpose, 600 volt building wire to be used as power, lighting, and control wiring. Suitable for use in conduit and raceways. Stranded copper with flame-retardant PVC (polyvinyl chloride) insulation and nylon jacket. Resistant to oil, gasoline, chemicals, and abrasion. UL (Underwriter's Laboratories) listed.
View Details
$104.99
500' 12STR GRN THHN WIRE
90 degrees Celsius, small diameter, general-purpose, 600 volt building wire to be used as power, lighting, and control wiring. Suitable for use in conduit and raceways. Stranded copper with flame-retardant PVC (polyvinyl chloride) insulation and nylon jacket. Resistant to oil, gasoline, chemicals, and abrasion. UL (Underwriter's Laboratories) listed.
View Details
$6.49
*WIREHOLDER PORCELAN
Midget type or light service radio wire holder. Mounting screw has a special head leaded into a grooved hole. 2" porcelain head, 1-11/16" screw, 1-3/8" diameter and 1/2" wire hole. Ideal to support service entrance cable prior to entrance. 600 lb pullout strength.
View Details
$4.89
*4x4x2-1/8 SQ BOX 1/2-3/4KO
Steel City new work electrical box. Steel. UL (Underwriter's Laboratories) listed.
View Details
$4.79
*CORNER BRACKET
The REAPR 11021 TAC Survival Shovel is the ultimate survival tool shovel. This compact, space saving tool, features a 7 1/2" stainless steel precision cast head (with a powder coat wrinkle finish) combining a saw edge, ripper, chopping edge and wrenches. Dig trenches, saw through wood, chop trees, cut cords and wires, loosen and tighten bolts, clear paths, and slice through the toughest patches of earth with just one tool. One side of the shovel head features a reinforced chopping blade and ripper that will cut and chop through almost anything. On the other side is a saw edge designed for precision cuts. With multiple wrenches also built into the head, this is simply the ultimate camping and survival tool. A grooved shovel handle shovel provides comfort and precision while military-grade 1680D ballistic nylon sheath with MOLLE attachments allows for portable backpack carrying.
View Details
$28.49
RECEPTACLE/FUSE HOLDER
Provides an efficient and low cost method to protect electric and appliance motors from damage due to overloads. The motor protection unit permits a supplemental fuse to be installed and is designed to open when the amperage is exceeded. All units are UL listed for a maximum 15A fuse at 125V AC. Fits standard electrical boxes. Carded packaging features wiring diagram, usage suggestions and fuse selection chart.
View Details
$24.99
SWITCH/FUSE HOLDER
Provides an efficient and low cost method to protect electric and appliance motors from damage due to overloads. The motor protection unit permits a supplemental fuse to be installed and is designed to open when the amperage is exceeded. All units are UL listed for a maximum 15A fuse at 125V AC. Fits standard electrical boxes. Carded packaging features wiring diagram, usage suggestions and fuse selection chart.
View Details
$4.59
*STAPLE CABLE 3/4"
Cable staple ideal for use with 3-wire UF, non-metallic, and BX cable. 3/4-inch unbreakable clear poly construction.
View Details
$6.89
1/2" LB ACCESS FITTING
Type LB , PVC access fitting for 90 deg turns with wire pulling access through back plate. Gasket and brass screws included. UL listed.
View Details
$7.89
3/4" LB ACCESS FITTING
Type LB , PVC access fitting for 90 deg turns with wire pulling access through back plate. Gasket and brass screws included. UL listed.
View Details
$7.89
1" PVC LB ACCESS FITTING
Type LB , PVC access fitting for 90 deg turns with wire pulling access through back plate. Gasket and brass screws included. UL listed.
View Details
$10.29
1-1/4" LB ACCESS FITTING
Type LB , PVC access fitting for 90 deg turns with wire pulling access through back plate. Gasket and brass screws included. UL listed.
View Details
$11.49
1-1/2" LB ACCESS FITTING
Type LB , PVC access fitting for 90 deg turns with wire pulling access through back plate. Gasket and brass screws included. UL listed.
View Details
$18.49
2" LB ACCESS FITTING
Type LB , PVC access fitting for 90 deg turns with wire pulling access through back plate. Gasket and brass screws included. UL listed.
View Details
$1.59
1/2"x45 PVC ELBOW
PVC (polyvinyl chloride) Schedule 40, 45-degree elbow. Couplings not included. UL (Underwriter's Laboratories) listed.
View Details
$1.99
CORDMATE OUTSIDE ELBOW
Used to make a 90 degree outside turn around a corner. 1 per card. UL (Underwriter's Laboratories) listed.
View Details
$8.49
CORD CHANNEL CORDMATE
Polybagged in easy-to-handle 5-foot lengths. 1/2-inch outside diameter. UL (Underwriter's Laboratories) listed.
View Details
$2.69
3/4" 45 DEGREE PVC ELBOW
PVC (polyvinyl chloride) Schedule 40, 45-degree elbow. Couplings not included. UL (Underwriter's Laboratories) listed.
View Details
$2.59
1"x45 PVC ELBOW
PVC (polyvinyl chloride) Schedule 40, 45-degree elbow. Couplings not included. UL (Underwriter's Laboratories) listed.
View Details
$5.29
1-1/4"x45 PVC ELBOW
PVC (polyvinyl chloride) Schedule 40, 45-degree elbow. Couplings not included. UL (Underwriter's Laboratories) listed.
View Details
$3.19
*1-1/2" PVC ELBOW
PVC (polyvinyl chloride) Schedule 40, 45-degree elbow. Couplings not included. UL (Underwriter's Laboratories) listed.
View Details
$7.59
2" PVC ELBOW
PVC (polyvinyl chloride) Schedule 40, 45-degree elbow. Couplings not included. UL (Underwriter's Laboratories) listed.
View Details
$1.99
1/2" 90 DEGREE PVC ELBOW
PVC (polyvinyl chloride) Schedule 40, 90-degree elbow. Couplings not included. UL (Underwriter's Laboratories) listed.
View Details
$2.39
3/4" 90 DEGREE PVC ELBOW
PVC (polyvinyl chloride) Schedule 40, 90-degree elbow. Couplings not included. UL (Underwriter's Laboratories) listed.
View Details
$4.19
1" 90 DEGREE PVC ELBOW
PVC (polyvinyl chloride) Schedule 40, 90-degree elbow. Couplings not included. UL (Underwriter's Laboratories) listed.
View Details
$5.19
1-1/4"x90D ELBOW SCH40
PVC (polyvinyl chloride) Schedule 40, 90-degree elbow. Couplings not included. UL (Underwriter's Laboratories) listed.
View Details
$6.79
1-1/2" 90 DEG PVC ELBOW
PVC (polyvinyl chloride) Schedule 40, 90-degree elbow. Couplings not included. UL (Underwriter's Laboratories) listed.
View Details
$6.79
2" 90 DEGREE PVC ELBOW
PVC (polyvinyl chloride) Schedule 40, 90-degree elbow. Couplings not included. UL (Underwriter's Laboratories) listed.
View Details
$174.99
500' 10SOL GRN THHN WIRE
90 degrees Celsius, small diameter, general-purpose, 600 volt building wire to be used as power, lighting, and control wiring. Suitable for use in conduit and raceways. Solid copper with flame-retardant PVC (polyvinyl chloride) insulation and nylon jacket. Resistant to oil, gasoline, chemicals, and abrasion. UL (Underwriter's Laboratories) listed.
View Details
